Publication
2024
Performance improvement of novel latent thermal energy storage system with two-layer metal foam porosities
Case Studies in Thermal Engineering Vol 60, 104668, 2024
A. Awasthi, K Hwang, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
Energy and economic evaluation of combined sensible-latent thermal energy storage system with various volume fractions of phase change material
Alexandria Engineering Journal Vol 98, 344–355, 2024
C. Suresh, A. Awasthi, D Lee , Y Jeon*
─────────────────────────────────────────────────────────────────────────────────Assessment of the spermatozoa transports between porous cervical walls continuously secreting Jeffrey fluid in human cervical canal
Alexandria Engineering Journal Vol 96, 249–267, 2024
A. Walait, A.M. Siddiqui, M.A. Rana, H. Ashraf, N. Ali Shah, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
Novel effective thermal conductivity numerical model for distinct shaped pure paraffins (C14–C33)
JOURNAL OF ENERGY STORAGE, Vol 76, 109654, 2024
B. Kumar, A. Awasthi, C Suresh, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
Development of highly stable n-Heptadecane/water-based phase change emulsion with mixed surfactant for thermal management applications
JOURNAL OF MOLECULAR LIQUIDS, Vol 393, 123695, 2024
V Chinnasamy, J Heo, H Lee, Y Jeon, H Cho
─────────────────────────────────────────────────────────────────────────────────
2023
Nonviable carbon neutrality with plastic waste-to-energy
ENERGY & ENVIRONMENTAL SCIENCE, Vol 16(7), 3074-3087
S Kwon, J Kang, B Lee, S Hong, Y Jeon, M Bak, S Im*
─────────────────────────────────────────────────────────────────────────────────
Current status of synthesis and consolidation strategies for thermo-resistant nanoalloys and their general applications
NANOTECHNOLOGY REVIEWS, 12: 20220567
V Dhand', Y Jeon', J Doh, G Han, S Kim*, K Rhee*
─────────────────────────────────────────────────────────────────────────────────Numerical study on the heat transfer characteristics of three-dimensional pulsating heat pipe
Journal of Mechanical Science and Technology 37 (9), 4869~4876
Jung, J, Jeon, Y*
─────────────────────────────────────────────────────────────────────────────────
Impact of couple stress and variable viscosity on heat transfer and flow between two parallel plates in conducting field
AIMS MATHEMATICS, Vol 8(7), 16773-16789
G Saini, B Hanumagowda, S Varma, J Singh, N Shah, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────Finite element study of nanoparticles spacing and radius on dynamics of water fluid subject to microgravity environment
RESULTS IN PHYSICS, Vol 47, 106355
B Zhang, L Tang, H Zhang, B Ali, N Shah, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
Detailed numerical analysis of heat transfer enhancement in horizontal shell-and-tube-type n-eicosane-based latent thermal energy storage system
JOURNAL OF ENERGY STORAGE, Vol 63, 106994
A Awasthi, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────Fabrication and thermophysical characterization of microencapsulated stearyl alcohol as thermal energy storage material
ALEXANDRIA ENGINEERING JOURNAL, Vol 71, 645-658
V Chinnasamy, J Heo, H Lee, Y Jeon, H Cho*
─────────────────────────────────────────────────────────────────────────────────
Facile numerical approximations to evaluate the performance of an ice-on-coil-type latent thermal energy storage tank with top-inlet–bottom-outlet configuration
ALEXANDRIA ENGINEERING JOURNAL, Vol 69, 445-456
A Awasthi, J Chung, H Cho, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
2022
Exploration of Multiple Transfer Phenomena within Viscous Fluid Flows over a Curved Stretching Sheet in the Co-Existence of Gyrotactic Micro-Organisms and Tiny Particles
MATHEMATICS, Vol 10(21), 4133
P Ragupathi, N Ahammad, A Wakif, N Shah, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────
Numerical analysis of heat transfer characteristics of a novel heat exchanger for Lorenz-Meutzner cycle with zeotropic mixture
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol 199, 123463
S Kim, D Lee, Y Jeon*
─────────────────────────────────────────────────────────────────────────────────Thermo-physical studies and corrosion analysis of caprylic acid–cetyl alcohol binary mixture as novel phase change material for refrigeration systems
ENERGY REPORTS, Vol 8, 7143-7153
H Ayaz, V Chinnasamy, Y Jeon, H Cho*
─────────────────────────────────────────────────────────────────────────────────
Super-cooling effects and solidification of water inside a horizontal cylinder with a rough, sinusoidal surface shape
JOURNAL OF ENERGY STORAGE, Vol 51, 104442
A Awasthi, N Shah, Y Jeon, O Kwon, J Chung*
─────────────────────────────────────────────────────────────────────────────────Performance characteristics of mobile cooling system utilizing ice thermal energy storage with direct contact discharging for a refrigerated truck
APPLIED ENERGY, Vol 308, 118373
J Ahn*, H Kim, Y Jeon, K Kwon
─────────────────────────────────────────────────────────────────────────────────
Optimization of motive nozzle position in a modified two-phase ejector expansion household refrigeration cycle using artificial neural network
ENERGY REPORTS, Vol 8, pp. 1114-1112
Y Jeon, D Lee, H Cho*
─────────────────────────────────────────────────────────────────────────────────
2021
Investigation of forced convective heat transfer with magnetic field effect on water/ethylene glycol-cobalt zinc ferrite nanofluid
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol 128, Article 105647
A Lee, Y Jeon, V Chinnasamy, H Cho*
─────────────────────────────────────────────────────────────────────────────────
2020
Seasonal energy performance characteristics of novel ejector-expansion air conditioners with low-GWP refrigerants
APPLIED ENERGY, Vol. 278, Article 115715
Y Jeon, S Kim, S Lee, H Chung, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Effects of nozzle exit position on condenser outlet split ejector-based R600a household refrigeration cycle
ENERGIES, Vol. 13(19), Article 5160
Y Jeon, H Kim, J Ahn*, S Kim*
─────────────────────────────────────────────────────────────────────────────────Effects of injection port angle and internal heat exchanger length in vapor injection heat pumps for electric vehicles
ENERGY, Vol. 193, Article 116751
J Jung, Y Jeon, W Cho, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Dynamic performance characteristics of R410A heat pump with consideration of energy efficiency and thermal comfort at various compressor frequencies and outdoor fan speeds
APPLIED THERMAL ENGINEERING, Vol. 165, Article 114499
K Song, Y Jeon, K Park, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
2019
Simulation-based comparative seasonal performance evaluation of single-stage heat pump and modulated twostage injection heat pump using rotary compressors with various cylinder volume ratios
APPLIED THERMAL ENGINEERING, Vol. 159, Article 113892
S Lee, Y Jeon, B Kim, S Yun, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
2018
Thermal performance characteristics of a pulsating heat pipe at various non-uniform heating conditions
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. Vol. 126, pp. 855-863
D Jang, H Chung, Y Jeon, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Simulation-based optimization of heating and cooling seasonal performances of an air-to-air heat pump considering operating and design parameters using genetic algorithm
APPLIED THERMAL ENGINEERING. Vol. 144, pp. 362-370
S Lee, Y Jeon, H Chung, W Cho, Y Kim*
─────────────────────────────────────────────────────────────────────────────────Comparative performance evaluation of conventional and condenser outlet split ejector-based domestic refrigerator-freezers using R600a
ENERGY. Vol. 161, pp. 1085-1095
Y Jeon, D Kim, J Jung, D Jang, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Performance comparison among two-phase, liquid, and vapor injection heat pumps with a scroll compressor using R410A
APPLIED THERMAL ENGINEERING. Vol. 137, pp. 193-202
D Kim, Y Jeon, D Jang, Y Kim*
─────────────────────────────────────────────────────────────────────────────────Comparative evaluation of flow boiling heat transfer characteristics of R-1234ze(E) and R-134a in plate heat exchangers with different Chevron angles
APPLIED THERMAL ENGINEERING. Vol. 132, pp. 719-729
D Kim, D Lee, D Jang, Y Jeon, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Performance optimization of an R410A air-conditioner with a dual evaporator ejector cycle based on cooling seasonal performance factor
APPLIED THERMAL ENGINEERING. Vol. 131, pp. 131, pp. 988-997
S Kim, Y Jeon, H Chung, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
2017
Numerical study of the effects of injection-port design on the heating performance of an R134a heat pump with vapor injection used in electric vehicles
APPLIED THERMAL ENGINEERING. Vol 127, pp. 800-811
J Jung, Y Jeon, H Lee, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Performance characteristics of domestic hybrid dehumidifier combined with solid desiccant rotor and vapor compression system
ENERGY. Vol 141, pp. 66-75
H Chung, Y Jeon, D Kim, S Kim, Y Kim*
─────────────────────────────────────────────────────────────────────────────────Effects of ejector geometries on performance of ejector-expansion R410A air conditioner considering cooling seasonal performance factor
APPLIED ENERGY . Vol. 205, pp. 761-768
Y Jeon, J Jung, D Kim, S Kim, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Performance characteristics of an R600a household refrigeration cycle with a modified two-phase ejector for various ejector geometries and operating conditions
APPLIED ENERGY. Vol. 205, pp. 1059-1067
Y Jeon, S Kim, D Kim, H Chung, Y Kim*
─────────────────────────────────────────────────────────────────────────────────Optimization of the injection-port geometries of a vapor injection scroll compressor based on SCOP under various climatic conditions
ENERGY. Vol. 135, pp. 442-454
D Kim, H Chung, Y Jeon, D Jang, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
Numerical study on the optimal design of injection-hole geometries of a twin rotary compressor in a liquid injection heat pump
APPLIED THERMAL ENGINEERING. Vol. 113, pp. 1178-1188
Y Jeon, S Lee, W Kim, J Jung, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
2016
Simulation-based optimization of an integrated daylighting and HVAC system using the design of experiments method
APPLIED ENERGY. Vol. 162, pp. 666-674
W Kim, Y Jeon, Y Kim*
─────────────────────────────────────────────────────────────────────────────────
DOMESTIC JOURNALS
[5] J Kim, J Kim, Y Jeon.* "Evaluation of Operational Performance and Carbon Emissions for the Feasibility of Air Source Heat Pump Application in Residential Buildings" Korean Society for Geothermal and Hydrothermal Energy (KSGHE) . Vol. 20(2), pp. 24-36,2024
[4] J Choe, J Jung, Y Jeon.* "Potential Benefits of Saturation Compression Cycle with Liquid Injection in Showcase Vapor Compression Cycle" Korean Journal of Air-Conditioning and Refrigeration Engineering. Vol. 33(4), pp. 190-198,2020
[3] J Lee, Y Jeon, S Kim, Y Kim.* “Experimental Analysis on the Performance Characteristics of an Ejector according to Inlet Pressure and Nozzle Position” Korean Journal of Air-Conditioning and Refrigeration Engineering. Vol. 27, pp. 263-268, 2015
[2] E Lee, Y Jeon, Y Kim,* J Jeon.* “An Analytical Study on Casing Design for Stabilization of Geothermal Well” Korean Journal of Air-Conditioning and Refrigeration Engineering. Vol. 24, pp. 784-791, 2012
[1] Y Jeon, H Park, J Lee, Y Kim.* “Analytical Study on the Performance Characteristics of an Instant Cooling Type Water Purifier with the Design Parameters of the Cooling Tank” Korean Journal of Air-Conditioning and Refrigeration Engineering. Vol. 24, pp. 545-552, 2012
International Patents
Refrigeration cycle and refrigerator having the same
- US Patent: US15511851, 2018 (등록)
- Europe Patent: 03196571 2017 (등록)
Ejector and cooling apparatus having the same
- US patent: 14981017, 2015 (출원)
- Europe Patent: 03040650, 2016 (등록)
Domestic Patents
3차원 진동형 히트파이프를 포함하는 배터리 모듈 10-2022-0048794, 2022 (출원)
가변형 이젝터 및 이를 갖는 냉동 사이클장치 10-1728955-0000, 2017 (등록)
이젝터 및 이를 갖는 냉동장치 10-2014-0192808, 2014 (출원)
냉동사이클 및 이를 갖는 냉장고 10-2014-0124355, 2014 (출원)